Flex-A-Rail White 44" Long
Flex-A-Rail White 44" Long

Flex-A-Rail White 44" Long

SKU: 106100
  • Exclusive
  • DIY Kit
  • New
  • Sale
  • Discontinued
Shipping Restrictions
Not Returnable
Adding to cart… The item has been added

Product Details

Flex-A-Rail is a great awning track for twisting around corners. Made of extruded PVC, this rail track can be bent using steam heat or a heat gun, if necessary. It is also easy to cut with a hacksaw and can be shaped with a dremel tool. Pair this awning track with a keder or vinyl awning rope which provides a great seal. Attach the awning rope to fabric or to a zipper and pull through the groove in the awning track.

To Install: Drill holes every 4–12 inches through the center of the track with at least one hole next to each end of the track. Screw down the track to secure.

Please Note: Installation screws are not included. This Flex-A-Rail requires specific screws: Screw Flat Head #4 x #6 x 3/4". These screws will not inhibit the Flex-A-Rail from working properly as they fit flush within the track.

Sailrite Pro Tip: Using this Flex-A-Rail track with an awning rope fits very snugly and is hard to work around a corner with a radius tighter than 10-inches.