SnapRite^® Adhesive Backed Foam Rubber Gasket for Snap Studs creates a leak-proof seal. Use these foam rubber gaskets when installing a snap fastener stud with a blind rivet. The gasket seals the base of the stud, making a tight water-resistant bond. Great for marine applications, these gaskets are for use with the SnapRite^® Surface Mount Stud Die.

There is no need to punch a hole in the gasket before stud installation. Simply position the Surface Mount Stud Die over the gasket and rivet the stud as normal. The rivet will pierce through the gasket.

For best results use in combination with the sealed end blind rivets.