Jib Hank #3 - Works With Wire Up to 5/8"
SKU: 24308
Jib Hank #3 - Works With Wire Up to 5/8"
SKU: 24308
Price per Each
Available: 11 | More Coming: 4/30/2025
Don’t miss out! Ends 4/29/25 at 8 a.m. ET.
Jib hank that is used to secure jibs to the wire forestay. Bends into place and locks positively over the stay with a sliding piston that closes a hooked end.
This jib hank is designed to secure a jib to the wire forestay. Gradually bend the long arm of the snap into place with a leather mallet and use the sliding piston to positively lock the hook end over the stay.
A #3 pressed spur grommet is required for installation. Install the grommet just behind the luff rope/wire in the sail. The long arm of the snap is bent into place. This should be done gradually to prevent breakage--a leather mallet and many blows works well.
Opening length of hank is 0.836". This will work with a 3/8" max. rope diameter, when used with a #3 spur grommet.
| Brand | Suncor |
|---|---|
| Color | Gold |
| Hardware Material | Brass |
| Size | 5/8" |
| Front | |
|---|---|
| A. | 0.67" |
| B. | 3.0" |