DOT Twist-Lock Fastener SnapRite Button Back Cloth-to-Cloth Set (Government-Black Brass)
SKU: 777250
DOT Twist-Lock Fastener SnapRite Button Back Cloth-to-Cloth Set (Government-Black Brass)
SKU: 777250
Price per Pack
Don’t miss out! Ends 4/29/25 at 8 a.m. ET.
This is a cloth to cloth complete fastener set for installing DOT Twist-Lock fasteners with Sailrite SnapRite buttons. Black-finish brass.
Related Items
Sailrite® Twist-Lock Eyelet Hole Cutter
SnapRite® Twist-Lock Die
Sailrite® SnapRite® Twist-Lock Die Kit
Professional Rivet Installation Tool
Sailrite® Rubber Poundo Board 12" x 12"
Sailrite® Drill Hole Cutter 1/8"
Sailrite® Cutting Block & Die Holder
Prong Bending Tool for Twist-Lock & Lift-The-DOT® Fasteners
Twist-Lock Deluxe Lever Hand Punch Tool
These Cloth-to-Cloth fastener sets are comprised of DOT® Twist-Lock eyelets, washers and studs with SnapRite® buttons. They are a quick and secure way to fasten two pieces of fabric together. Also known as Common Sense® fasteners, they are generally used on mainsail covers and dodgers. This fastener method not only gives a finished appearance but also eliminates any possibility of chafe.
This Cloth-to-Cloth Twist-Lock Fastener is made from black-finish brass and perfectly suited for a marine environment.
Please Note: This kit utilizes SnapRite buttons which have a hole in the center for use with a mandrel. If you prefer a button without a hole, please refer to DOT® Twist-Lock Fastener Cloth-to-Cloth Button Back (#777800).
Includes:
- DOT® Twist-Lock Fastener Eyelet (#777007)
- DOT® Twist-Lock Washer (#777010)
- DOT® Twist-Lock Fastener 2-Hole Screw Stud (#777031)
- SnapRite® Snap Fastener Button Silver 11/64" Barrel (#104151)
| Brand | DOT |
|---|---|
| Certifications | Berry Amendment Compliant |
| Color | Black |
| Department | Hardware |
| Fastener Sets | Cloth-to-Cloth |
| Fastener Type | Twist-Lock |
| Hardware Material | Brass |
| Manufacturer | Scovill |
| Eyelet | |
|---|---|
| A. | 0.835" |
| B. | 1.066” |
| C. | 0.567" |
| D. | 0.346" |
| E. | 0.248" |
| Washer | |
|---|---|
| A. | 0.403" |
| B. | 0.655" |
| C. | 1.006" |
| D. | 0.772” |
| 2-Hole Screw Stud | |
|---|---|
| A. | 0.213" |
| B. | 0.167" |
| C. | 0.463" |
| D. | 0.683" |
| E. | 0.824" |
| F. | 1.250" |
| Button | |
|---|---|
| A. | 0.591" |
| B. | 0.172" |
| C. | 0.162" |