#6 Eyelet 7/8" (Brass)
SKU: 26112
#6 Eyelet 7/8" (Brass)
SKU: 26112
Price per Each
Available: 569
Don’t miss out! Ends 4/29/25 at 8 a.m. ET.
Eyelets are used anywhere a purchase on fabric is required. Rings are first sewn to the fabric with Sail Twine. Then the Eyelet is pressed inside to protect the thread from chafe.
Related Items
Round Ring Brass #6 - 7/8"
#6 Eyelet Die Set 7/8"
Sailrite® Cutting Block & Die Holder
Sailrite® Rubber Poundo Board 12" x 12"
5-Ply Waxed Polyester Twine Bobbin (81')
5-Ply Waxed Flat Polyester Twine 4 oz. (500')
Sailrite® Round Maul 3#
#9 Eyelet 1-1/4" (Brass)
Scratch Awl Yellow
1" Stainless Steel Round Ring
The #6 eyelet is designed to be used with a 7/8" brass or 1" stainless steel ring (rings sold separately). They are used in the corners of sails to provide much stronger purchase points than spur or jiffy grommets. Typically used on sailboats from 16' to 25' long. The ring is sewn in place with waxed twine, then the eyelet is inserted into the sewn ring and rolled over using the #6 Eyelet Die Set 7/8" (#18207, sold separately) to protect the hand stitching from chafing from lines or shackles.
Made exclusively for Sailrite in the USA.
| Brand | Unbranded |
|---|---|
| Color | Gold |
| Department | Hardware |
| Grommet Type | Eyelets |
| Hardware Material | Brass |
| Size | 7/8" |
| Overall Height (before installation): | 0.59 inch |
|---|---|
| Outside Barrel Diameter: | 0.875 inch |
| Inside Barrel Diameter: | 0.793 inch |