Personalize your leather goods with just the pull of a lever — no mallet or hand-held setting tool required. This three-piece HandyPress® Stamp Adapter set pairs with the sliding flat workbench on the press to leave clear, lasting impressions on a variety of leather items. Each adapter is optimized for stamps of different sizes, so you can take advantage of a wide range of heights and widths for decorative debossing. One adapter features a ram foot that spreads pressure evenly across oversized stamps, giving you crisp, consistent results from type holders and other large attachments. 

These adapters have posts on either end: one for the stamp, and one to attach the adapter to the HandyPress®. Each adapter's 14mm (9/16") long post fits into the 9.53mm (3/8") hole in the main vertical shaft on the press, while the opposite post holds the stamp. The adapters allow you to rotate the stamps for your desired orientation. 

Here are the stamp sizes you can use with each adapter:

• Adapter 1 (Small Post): 3mm (1/8"), 6.5mm (1/4") and 9.5mm (3/8").
• Adapter 2 (Large Post): 13mm (1/2"), 19mm (3/4") and 26mm (1").
• Adapter 3 (Large Post With Ram Foot): 13mm (1/2"), 19mm (3/4") and 26mm (1"), as well as type holders and other oversized accessories.

Please Note: For best results, moisten the leather and use the HandyPress sliding flat workbench without the cutting board when stamping. Stamps, type holders and other compatible accessories are sold separately.