Headliner Adhesive 12 oz.

SKU: 123288

product image zoom product image
product image
product image

Headliner Adhesive 12 oz.

SKU: 123288

Price per Each

$ 18 95

Available: 0 | More Coming: 4/28/2025

Quantity

Discount

Price

$18.95
5.00%
$18.00

You will be notfied when back in stock

Summary

AlbaChem Headliner Adhesive delivers an incredibly strong bond for headliners. It's a great choice for marine, automotive and upholstery applications.

Full Description
Jump To:
Description

AlbaChem® Headliner Adhesive delivers a strong bond for lightweight headliners. It's a great choice for marine, automotive and upholstery applications. It's water resistant and can withstand high temperatures, making it a great choice for marine use. The nonstaining formula dries clear and will not yellow. The narrow spray pattern stream makes this a great choice for trim work and small areas. Headliner Adhesive bonds to plastic, wood and metal. Use for foam-backed vinyl headliners, fabric-backed vinyl headliners, and carpet installation, insulation adherence, van conversions, automotive applications and motor home uses. It's also used in the manufactured housing industry. It is made for decorative laminate work in furniture, cabinet and woodworking.

Headliner Adhesive is not recommended for use with unsupported vinyl fabric (no fabric on back side).

Shipping Note: This item is flammable. Flammable items can only be shipped Ground to the 48 contiguous United States. This item cannot ship via Post Office.

Features:

  • Strong bond for lightweight headliners.
  • Great for auto and marine upholstery and carpet installation.
  • Water resistant — great for marine use.

Directions for Use:

  1. Clean bonding surfaces with 3M™ Specialty Adhesive Remover (#108984) to remove dust, dirt, oil, etc., before application of the adhesive.
  2. Shake the can well before using.
  3. Hold the can 6" to 8" from the surface and spray. Keep the can moving to avoid buildup on surface. Only a thin film is required; avoid over-spraying.
  4. For a permanent bond, spray both surfaces. For a temporary or repositionable bond, spray only one surface.
  5. Allow the adhesive to dry to a tack before bonding.
  6. To prevent the spray nozzle from blocking: At the end of each day, turn the can upside down and press the tip until spray is clear from adhesive.
  7. Excess adhesive and overspray may be removed from hard surfaces using 3M™ Specialty Adhesive Remover (#108984).
Specifications
BrandAlbaChem
DepartmentAdhesives & Tapes
Size12 oz

Spray Type: Aerosol
Adhesive Color: Transparent
Spray Pattern: Narrow Stream Lace/Web
Adhesive Strength: High
Coverage: Approximately 22 square feet (coating both surfaces vertically and horizontally)
Max Service Temperature: 140° F
Becomes Tacky: 1-15 minutes
Bonding Time Range (after tacky): 30 minutes
Storage/Shelf Life: Room Temp, 3 years
Overspray Removal: 3M Specialty Adhesive Remover
Adhesive Type: Synthetic Rubber/Hydrocarbon Resin
Substitute: 3M General Trim Adhesive

Shipping Restrictions
Flammable items can ONLY be shipped Ground to the 48 contiguous United States.