Sailrite® Dodger Skin Kit for 2-Bow Frame - Sattler® Fabric

Sew it yourself! The Sailrite® Dodger Skin Kit for 2-Bow Frame contains all the materials needed to sew the fabric portion of a dodger, including 60-inch Sattler® Marine Grade Fabric. Dodger tops, also known as sprayhoods, provide protection from the sun and offer shelter from rain and spray. Skin kits can be used to replace the fabric on an existing dodger frame or can be paired with our 2-Bow Dodger Frame Kit with Rigid Supports (#126461) to create a new, custom dodger from start to finish. 

The Sailrite® Dodger Skin Kit with Sattler® fabric features zippered tubing sleeves for easy removal and storage, and a fabric tail at the aft edge to prevent water from wicking back under the dodger. A vinyl fabric facing along the forward edge, which attaches to the deck, provides reinforcement for fasteners and helps reduce wrinkles. This dodger skin kit is intended to be used with frames that use rigid support struts (included in #126461).

This kit will accommodate a maximum frame width of 84 inches and a nominal height of 40 inches at its maximum spread, with a maximum fore-and-aft length of up to 70 inches (includes the front dodger panel to the deck). Dodger skin kits do not include frames, fittings or rigid supports; those are sold separately or as part of our 2-Bow Dodger Frame Kit with Rigid Supports (#126461).

A rear frame chafing guard strip is an optional feature that you can add to your dodger. A separate video shows how to add this chafe guard and what items need to be ordered separately for it. To find the video and supplies list, search #300398XHT at Sailrite.com.

Please Note: This item is nonreturnable. This skin kit should be assembled using the instructional video found in the Videos tab; written instructions are not provided.

Kit Includes:

• Sattler® Marine Grade 60" Fabric – 10 yards
• Sattler® Acrylic Bias Binding Tape, 1" – 60 feet
• Tex 90 (V-92) UV Bonded Polyester Thread 4 oz. – 1
• Lenzip® #10 Separating Molded Tooth Zipper (Delrin® Single Pull Slider, Locking), 84" – 1
• Lenzip® #10 Separating Molded Tooth Zipper (Delrin® Single Pull Slider, Locking), 36" – 1
• Tape Shelter-Rite® 18 oz. 3" (Not Adhesive Backed) – 10 feet
• Lenzip® #10 Style C Double Non-Locking Metal Zipper Pull (Coil Chain) – 10 pack
• Lenzip® #10 Continuous Coil Zipper Chain – 15 feet
• Polyester Webbing, 1" – 20 feet
• Filament Strapping Tape 3/4" – 1
• Seamstick 3/8" Basting Tape for Canvas (50 yds.) – 1
• Sailrite® Patterning Material 78" – 10 yards
• Strataglass™ 30 Gauge Vinyl Window Material 54" x 110" Clear – 1 sheet
• Sailrite® Woven Sew In Tags (2 pack) – 1
• DOT® Twist-Lock Fastener 2 Screw Stud Cloth-to-Surface Set (Nickel-Plated Brass), 10 pack – 2
• Trimmable Butyl Tape 1" (30 Feet) – 1
• Sailrite® Snap Fastener Button 5/16" (Nickel-Plated Brass) – 10 pack
• Snap Fastener Installation Tool – 1
• DOT® Snap Fastener Hard Action Socket (Nickel-Plated Brass) – 10 pack
• DOT® Snap Fastener & Pull-The-DOT® Eyelet 1/4" (Nickel-Plated Brass) – 10 pack
• DOT® Snap Fastener Standard Cloth-to-Cloth Stud (Nickel-Plated Brass), 10 pack – 2
• Sailrite® Snap Fastener Cloth-to-Surface Set 3/8" Screw (Nickel-Plated Brass/Stainless Steel) – 10 pack
• Blind Rivet for SnapRite® Surface Die (Stainless Steel) – 10 pack

Required Tools (Not Included):

• Sewing Machine
• Scissors or Hotknife
• Marking Tool
• Measuring Tool
• SnapRite® Surface Mount Stud Die #103754

Reference end of instructional video for additional recommended items.