Jib Hank #1 - Works With Wire Up to 5/16"
SKU: 24306
Jib Hank #1 - Works With Wire Up to 5/16"
SKU: 24306
Price per Each
Available: 41
Don’t miss out! Ends 4/29/25 at 8 a.m. ET.
Jib hank that is used to secure jibs to the wire forestay. Bends into place and locks positively over the stay with a sliding piston that closes a hooked end.
This #1 jib hank is designed to secure a jib to the wire forestay. Gradually bend the long arm of the snap into place with a leather mallet and use the sliding piston to positively lock the hook end over the stay.
A #1 pressed spur grommet is required for installation. Install the grommet just behind the luff rope/wire in the sail. The long arm of the snap is bent into place. This should be done gradually to prevent breakage--a leather mallet and many blows works well.
Opening length of hank is 0.375". This will work with a 1/4" max. rope diameter, when used with a #1 spur grommet.
| Brand | Unbranded |
|---|---|
| Color | Gold |
| Hardware Material | Brass |
| Size | 5/16" |
| Front | |
|---|---|
| A. | 0.375" |
| B. | 2.25" |