HandyPress 2-Prong Cloth-to-Cloth Stud Punch
SKU: 126801
HandyPress 2-Prong Cloth-to-Cloth Stud Punch
SKU: 126801
Price per Each
Available: 252
Don’t miss out! Ends 4/29/25 at 8 a.m. ET.
Use the Sailrite HandyPress to punch slits in fabric for installation of either Twist-Lock or Lift-The-DOT 2-Prong Studs with this hole punch. This punch cuts two slits for the stud prongs in one quick and easy step.
Related Items
HandyPress® Lift-The-DOT® Hole Cutter
HandyPress® Twist-Lock Eyelet Hole Cutter
Sailrite® HandyPress®
DOT® Lift-The-DOT® Fastener 2-Prong Stud (Government-Black Brass)
DOT® Lift-The-DOT® Fastener 2-Prong Stud (Nickel-Plated Brass)
DOT® Lift-The-DOT® Fastener Cloth-to-Cloth Set (Government-Black Brass)
DOT® Lift-The-DOT® Fastener Cloth-to-Cloth Set (Nickel-Plated Brass)
DOT® Twist-Lock 2-Prong Stud (Government-Black Brass)
DOT® Twist-Lock 2-Prong Stud (Nickel-Plated Brass)
DOT® Twist-Lock Fastener 2-Prong Cloth-to-Cloth Stud Set (Government-Black Brass)
DOT® Twist-Lock Fastener 2-Prong Cloth-to-Cloth Stud Set (Nickel-Plated Brass)
Use the Sailrite® HandyPress® to punch slits in fabric for installation of either Twist-Lock or Lift-The-DOT® 2-Prong Studs with this hole punch. This punch cuts two slits for the stud prongs in one quick and easy step. Use the HandyPress® Sliding Flat Workbench with the HandyPress® Cutting Board beneath the fabric assembly.
To Use: Install the punch into the main vertical shaft's inner diameter and secure with the thumbscrew. Set the workbench with cutting board so the back fence edge sets your desired fastener distance from the fabric edge. Set the tool for appropriate compression as directed in the HandyPress guidebook. Holding your assembly in place with one hand, pull the handle down to cut your material for hardware installation.
Tip: Add the optional HandyPress® Ruler (#126459) to aid in the consistency and efficiency of fastener hole spacing.
Please Note: Twist-Lock and Lift-The-DOT hardware sold separately.
Note: This hole cutter was designed for the HandyPress. To see if it is compatible with your hand press, check the Dimensions tab and verify that it will attach to your press.
| Brand | HandyPress |
|---|---|
| Department | Tools |
| Tool Type | Lift The Dot |
| Warranty | 90 Days |
HandyPress® 2-Prong Cloth-to-Cloth Stud Punch
| A. | 3/8" (9.53mm) |
|---|---|
| B. | 2.01" (51.05mm) |
| C. | 5/32" (4mm) |
| D. | 35/64" (14mm) |
| E. | 1/2" (12.5mm) |