HandyPress® Small Hole Punch Set

Use your Sailrite® HandyPress® to punch holes in fabric, webbing, leather and more. This hole punch set includes the HandyPress® 3-Hole Punch & Setter Adapter (M8-1) and six Sailrite® Punch Tubes.

Thread Size: M8-1

Punch Tube Sizes:

• 1/16" (1.5mm)
• 5/64" (2mm)
• 3/32" (2.5mm)
• 9/64" (3.5mm)
• 5/32" (4mm)
• 3/16" (5mm)

To Use: Thread a punch tube onto the adapter. Then, thread the adapter onto the HandyPress® main vertical shaft. Set the workbench with cutting board so the back fence edge sets your desired hole distance from the fabric edge. You can rotate the punch position with great flexibility given that putting the punch in an outer hole is preferable. Fabric cuts eject better at the outer mounting holes. Follow the instructions in the HandyPress guidebook to set the tool for optimal results. 

Tip: Add the optional HandyPress® Ruler to aid in the consistency and efficiency of hole spacing.
               
Note: This hole punch set was designed for the HandyPress. To see if it is compatible with your hand press, check the Dimensions tab and verify that it will attach to your press.